Monitoring and Controllers

Page of 2 Next > Last ≫

Presonus Faderport

Feel is crucial when you're spending countless hours recording and mixing. So the ultra-affordable FaderPort features the same high-quality, touch-sensitive, long-throw, motorized Alps fader that is found in expensive control surfaces and digital mixing consoles. With its 1,024-step resolution and dual-servo drive-belt motor, the response will be smooth and seamless.

Compatible with virtually all major DAW programs, the FaderPort enables you to record perfect fades and write single-channel or grouped-channel volume, mute, and pan automation in real-time.
Control your DAWÍs Solo, Record-enable, window selection, Play, Stop, and Record functions. Manage markers and punch in and out with a footswitch (not included). The FaderPort makes it fast and easy.

You can even create your own custom key mappings. And if you use PreSonus Studio One DAW software, your FaderPort will be automatically recognized and can be used to tweak virtually any plug-in parameter. 


Presonus HP4

Simplicity is the HP4's hallmark. You get left and right line inputs, left and right line outputs with level control, and the four headphone outs. You can globally mute the headphone outs, adjust the overall headphone level, sum the stereo signals to mono, and mute the rear-panel Monitor outputs.


Presonus HP60

The HP60 features two sets of line-level, stereo inputs that are routed to all six headphones; a Mix control that sets their relative levels for each headphone output. So you can feed the main control-room mix to channel A and the click to channel B and use the Mix controls to individually raise or lower the click relative to the main mix for each musician. Problem solved.

In addition to the two pairs of main stereo inputs, you get an external stereo input pair with level control for each headphone channel. A Mono switch lets you sum the left and right inputs. Additionally, a mute switch is provided for each headphone output.

So you can send each person a feed of just their instrument or voice and can control the level separately for each. Problem solved.


Presonus Monitor Station

Based on our hot-selling Central Station PLUS rack-mount control center, the Monitor Station enables you to manage multiple audio sources and sets of monitor speakers, simply and easily, right from your desktop.

This convenient control center provides two sets of stereo, line-level analog inputs and a pair of RCA analog aux/phono inputs with a defeatable RIAA filter so you can connect a turntable or DVD player.


AVIOM A360

Aviom's most advanced personal mixer


AVIOM A16II

16-channel stereo personal mixer


AVIOM A16R

1U rack version of the 16-channel stereo personal mixer


AVIOM A16CS

Remote controller for the A-16R


AVIOM A16-D PRO

Distributes Pro16 A-Net plus DC power to up to eight Pro16 devices


AVIOM A-16D

Distributes a 16-channel Pro16 A-Net stream to up to eight Pro16 devices


AVIOM AN-16/I V.2

16 TRS balanced line-level inputs


Clear-Com CS-702

Supports up to 40 beltpacks or 7 speaker stations on 2 channels
+ Automatic short-circuit protection andreset with LED indicators
+ Dual-action electronic momentary/ latching "Talk" buttons
+ Mic- or line-level program with selectable "Program Interrupt"
+ "Remote Mic Kill"
+ Stage announce with relay
+ Individual volume controls for each channel
+ Front-panel headphone connector
+ Channel A & B "Link" switch to operate as a one-channel system
+ Front-panel speaker output
+ UL approved
+ LED buttons for talk, call, announce, link, all talk, or mic on. 


Clear-Com MS-702

2-Channel Headset/Speaker Main Station with built-in 2-amp power supply, rack mount (1RU) - UL Listed

Compact, feature-laden, single rack-space intercom main station supports up to 40 RS-601 beltpacks, 10 speaker stations or 12 headset stations on two channels. 


Clear-Com MS-704

4-Channel Headset/Speaker Main Station with Built-in 2-amp Power Supply, Rack Mount (2RU)

Four intercom channels with programmable front-panel buttons. High-capacity, fail-safe power supply supports up to 40 RS-601 beltpacks or 10 speaker stations or 12 headset stations; 3 IFB channels, announce button/relay, channel-linking button and Remote Mic Kill switch.


Clear-Com SB-704

4-Channel Switchboard Main Station - 5-channel X 10 station assignment matrix, no speaker - with built-in 2-amp power supply, rack mount (2RU)

SB-704 includes all of the features of the MS-704, with a 4 x10 assignment matrix in place of the internal speaker (external speaker required for station monitoring). The station features a ten-position slide switch matrix that allows assignment of any of the ten intercom lines to any of the four intercom channels, to an isolated separate party-line, or to an off position. 


Clear-Com PS-702

2-Channel 1-Amp (2-Amp Peak) Rack Mount (1RU) Universal Power Supply. 2-channel x 3 intercom jacks, 1 A/B selectable headset jack and 1 program input.

The PS-702 can deliver 1.2 amps at 30 volts DC to two channels. This is sufficient to power up to 40 beltpacks, 10 speaker stations, or 12 headset stations even under the most demanding conditions. Either channel is capable of supplying up to 1.2 amps. The full current capacity may be divided between the two channels.


Clear-Com PS-704

4-Channel 2-Amp Rack Mount (1RU) System Power Supply - UL Listed. 4-channel x 2 intercom jacks, 1 program input, universal power supply.

The PS-704 is a four-channel, single rack-space intercom power supply that features Clear-ComÕs "fail-safe" design for maximum reliability. The power supply delivers 1.2 amps at 30 volts, supplying power for one to four channels of intercom. It will support up to 40 beltpacks, 10 speaker stations or 12 headset stations. 


Clear-Com PK-7

1-Channel 0.4 Amp Portable Power Supply

The PK-7 power supply will support up to 30 Que-Com headset stations to 9 partyline beltpacks. It is line and load regulated and short-circuit protected. 


Clear-Com RS-601

RS-601 is a single channel wired beltpack with a 4-pin male headset connector and 3-pin female/male loop thoguh intercom line connectors.  The beltpack has a 2.5mm AUX headset connector and an RS-232 data connector for programming. 

The beltpack can be programmed using the V-pack software, which does not require beltpack to be opened or any dip switches changed, etc. 


Clear-Com RS-602

The RS-602 is a 2-channel, dual listen monaural beltpack with a 4-pin male headset connector and 6-pin female/male loop through intercom line connectors. It requires YC-36 adapter to connect with standard 3-pin cabling, 2.5mm AUX headset connector and an RS-232 data connector for programming.

The beltpack can be programmed using the V-pack software, which does not require beltpack to be opened or any dip switches changed, etc.


Clear-Com RS-603

The RS-603 is a 2-channel 3-pin dual-listen monaural beltpack with a 4-pin male headset connector and 3-pin female/male loop through intercom line connectors. It also has a 2.5mm AUX headset connector and an RS-232 data connector for programming.  Two channels of audio are passed down a single 3-pin XLR with TWC-701 or TWC-704.

The beltpack can be programmed using the V-pack software, which does not require beltpack to be opened or any dip switches changed, etc.


Clear-Com HB-702

2-Channel Select Flush-Mount Headset Station (4.5" X 4.5") Mounts in Console or Standart 2-Gang Electrical Box

HB-702 is a selectable two-channel wall or console-mounted headset station. Microprocessor-controlled logic and switching, with momentary/latching talk button. Visual call signaling.

Optional 4-wire and TW daughter boards. 


Clear-Com HB-704

4-Channel Select Flush-Mount Headset Station (4.5" X 4.5") Mounts in Console or Standard 2-Gang Electrical Box

HB-704 is a selectable four intercom channel wall or console-mounted headset station. Microprocessor-controlled logic and switching, with momentary/latching talk button. Visual call signaling.

Optional 4-wire and TW daughter boards. 


Clear-Com RM-702

2-Channel Headset/Speaker Station, Rack Mount (1RU)

Single rack-space, two-channel station is powered by the intercom line. Operator can talk and/or listen on either or both channels. Accepts line-level audio program input via DB-15 Connector, with both channels programmable for interrupt. Microphone limiting and speaker "dipping" circuit for greater output before feedback. 


Clear-Com RM-704

4-Channel Headset/Speaker Station Rack Mount (2RU)

Remote station provides four independent intercom channels, with programmable front-panel buttons for versatility. Separate volume controls for each channel and four separate audio program inputs via DB-15 Connector. Three IFB channels for talent cuing and announce button/relay for paging. Powered by the intercom line. 


Clear-Com KB-702

2-Channel Select Flush Mount Headset/Speaker Station Mounts in V-Box or Accessory Enclosure (8.25" X 4.5")

The KB-702 remote speaker station permits the user to select between two channels of party-line communications, with the ability to talk and/or listen on the selected channel. The user can listen via the integrated speaker, or may use a headset or telephone-style handset - and can talk via a headset mic, a telephone handset, or a push-to-talk microphone. 


Clear-Com KB-702GM

2-Channel Select Flush-Mount Headset/Speaker Station with Mic Jack and Vox, Mounts in V-Box (as show in picture below), Console or Accessory Enclosure (8.25" X 4.5")

KB-702 GM provides a remote speaker station permits the user to select between two channels of party-line communications, with the ability to talk and/or listen on the selected channel. The user can listen via the integrated speaker, or may use a headset or telephone-style handset - and can talk via a headset mic, a telephone handset, or a push-to-talk microphone. KB-702 also includes gooseneck microphone (GM-9/GM-18 or GN-250/ GN-450) connector options, with adjustable VOX feature and mic/ headset switch. 


Clear-Com KB-701

1-Channel Flush-Mount Push-to-Talk Speaker/Mic Station Mounts in the V-Box or Accessory Enclosure (8.25" X 4.5")

The KB-701 remote speaker station connects to a single channel of party-line intercom and operates in half-duplex mode. It features both an integral speaker and a flush mount electrets microphone with mic limiter and a push-to-talk button.


Clear-Com V-BOX

V-Box permits either angled or vertical portable, desktop or wall mounting of the KB-702, KB-702 GM, and KB-701 speaker stations. Both male and female 3-pin XLR connectors on side panel. Rugged metal and wood construction for an attractive, durable enclosure. 


Clear-Com EF-701M

4-Wire Interface with Call Signal, Matrix-to-Partyline

The EF-701M interface converts a single channel of standard or TW partyline intercom to four-wire audio, while also converting call signals to RS-422 data (and back). The resulting four-wire audio plus RS-422 data can then be sent to a Clear-Com Matrix port, fiber-optic converter (modem) or connected to another EF-701M over twisted-pair cable such as CAT-5E.


Clear-Com IF4W4

4-Channel 3- or 4-Wire Camera Interface Rack Mount (1RU), provides 4 discrete Clear-Com to 3- or 4-wire interface circuits

Four channel interface connects Clear-Com to TV cameras, two-way radios, satellite links, and other communications devices through either their headset jacks or 4-wire circuits. IF4W4 has selective partyline capability. Features individual transmit, receive, and null controls, as well as transmit level indicators. Switchable mic or line-level output for compatibility. The built-in test jack and test tone provide quick nulling.


Clear-Com TW-12C

Clear-Com/RTS System Interface Rack Mount (1RU), connects Clear-Com to Clear-Com or Clear-Com to RTS systems

TW-12C connects a single channel of intercom from one system to another. Opt isolation eliminates hums and buzzes. Compensates for level and impedance differences between systems. Allows Clear-Com-to-Clear-Com, Clear-Com-to-RTS, and RTS-to-RTS system configurations. Powered by the connected intercom system. Translates "call" signals in both directions. 


Clear-Com TW-47

Clear-Com/RTS 2-Way Radio Interface, connects Clear-Com or RTS to any 2-way radio

Compatible with both Clear-Com and RTS¨, TW-47 connects virtually any set of walkie-talkies to anyone on the wired partyline intercom; simply use one walkie-talkie as a basestation. The base station radio is keyed from the intercom call signal. Extensive RF and EMI isolation prevents interference from entering the intercom system. Separate transmit and receive level controls are provided, along with audio level and transmitter keying indicators. The stand-alone interface is powered by the intercom line.

Note:  Two-way radio must have headset and microphone jacks. 


Clear-Com PIC-4704

IFB Central Electronics Rack Mount (1RU), requires MA-704/AX-704 controllers or MS-812/IFB card option and IC-25-6 or similar

Each IFB Controller handles up to four Talent Receivers. For use with MA-704 and AX-704 IFB Control Panels or intercom stations. This unit contains the circuitry for selecting one of two program sources, sending the program to the IFB channels, and interrupting it via the Talent Control Station. Variable audio program dip-level. Monaural or stereo/ split-feed outputs. Improved and intuitive user interface. Requires a 6-pin XLR cable for connection to MA-704/AX-704 control panels.  Powered by intercom power supply. 


Clear-Com MA-704

IFB Control Panel with Microphone Jack (6.3" X 1.7"), for console or optional rack mount (CEP-RK). 


Clear-Com AX-704

IFB Expansion Control Panel - requires MA-704, for console or optional rack mount (CEP-RK) 


Clear-Com TR-50

Monaural IFB Talent Receiver 1/8" Mini Jack Includes TS-1

An amplified single-channel talent beltpack with volume control. It connects to the Program Interrupt controller with standard microphone cable. Mini earphone jack output. Includes talent ear set.


Clear-Com TS-1

 Monaural IFB Talent Earphone, plugs into TR-50 and wireless IFB recievers


Clear-Com SMQ-1

 Que-Com Single Ear Headset/Beltpack Combination


Clear-Com AB-120

On-Air Announcer Console, ROHS Compatible

The On-Air Announcer Console is the ultimate broadcast-quality tool for announcers and commentators, the AB-120 integrates all of the inputs, outputs, and controls necessary at the announce position, including intercom "Talkback," IFB receiver, and a silent "Mute" button that provides noise-free cough and "mic on/off" switching. Extremely flexible, the console is easily configured for practically any combination of audio sources, microphones, headsets, or intercom systems, ensuring quality audio and powerful communications. 


Clear-Com RCS-2700

8 X 24-Channel Programmable Station-Assignment Panel - Stores 14 presets - Expandable up to 15 X 72 (6 units) Rack mount (2RU) - Assigns 24 destination paths to one of eight partyline channels

RCS-2700 is ideal for medium to large installations where channel assignments to remote stations frequently change. 8 master channel "sources" can be assigned to any 24 remote station "destinations", and additional RCS-2700 units can be connected for up to 15 sources and 72 destinations. It can store 14 presets. 


Clear-Com FL-7

Call Signal Flasher Provides Visual And/Or Audible Indication of a Call Signal

New LED design with dimmer. Provides both a visual and audible indication of a call signal on the intercom channel. Frontpanel mode switch selects flasher, ring or both. Allows control of both tone volume and light brightness.


Clear-Com WP-2

 2-Channel Selectable Intercom Outlet Wall Plate, 3-pin male connector and channel select switch on a single-gang wall plate


Clear-Com WP-6

 2-Channel 6-Pin Intercom Outlet Wall Plate, 6-pin male connector on a single-gang wall plate for RS-602 and RS-622


Clear-Com YC-36

The YC-36 is a 3-pin to 6-pin adapter. It can combine 2 single-channel 3-pin cables into a single 2-channel 6-pin connector.  This cable is for use with RS-602 ad RS-622 (2-channel beltpacks).


Clear-Com MT-1

Isolator Circuit Card for Partyline Intercom Systems. Electrically isolates ground, power and signalling between two systems 


Clear-Com GM-9

The GM-9 (9" length, 22cm) gooseneck microphone features a gold-plated, threaded, and locking 3-conductor quarter-inch phone plug connector. A fitted windscreen is included (not pictured). The uni-directional electret condenser mic element has a side and rear rejection of greater than 6 dB between 100 Hz and 10 kHz.

Compatible with I-Series and ICS Panels.


Clear-Com GM-18

The GM-18 (18" length, 46 cm) gooseneck microphone features a gold-plated, threaded, and locking 3-conductor quarter-inch phone plug connector. A fitted windscreen is included (not pictured). The uni-directional electret condenser mic element has a side and rear rejection of greater than 6 dB between 100 Hz and 10 kHz.

For Encore stations and ICS panels (Other than ICS-1008E and 1016E). 


Clear-Com HMS-4X

HMS-4X Main Station Highlights

High Channel Density. Four independent intercom channels and power for beltpacks transmitted over shielded twisted-pair (Ex. microphone cable, CAT5, or CAT6 cable).

No Rewiring Required. System designed to preserve investment by operating on shielded existing infrastructure.
Single Cable Operation. Fewer cables save time and cost during setup and configuration.
No Hum. No Buzz. All-digital system offers immunity to electro-magnetic interference and ground loops.
High User Capacity. Connect up to 20 beltpacks on a single HMS-4X Main Station across four channels.
Quick Startup. Get up-and-running fast and effortlessly with easy plug-and-go installation and hardware auto-discovery.
Seamless Interfacing. Optional two-wire and four-wire modules interface with existing analog intercom systems and audio devices.

Easy-to-Navigate Menu. Quick access to system settings and configuration for fast and painless set up.
Easy Updates. Apply firmware maintenance and upgrades easily via USB ports.


Clear-Com HBP-2X

Beltpack Highlights
Channel Density. Similar to a source assignment panel, a single cable gives every connected beltpack the capacity to access all four system channels.

Selectable Channels. The full-duplex, 2-channel beltpack can select up to two of the available four system channels and access program audio, each with individual level control.

Save Resources. Networked audio is distributed over a single, shielded twisted pair, reducing the number of cables to yield time and cost savings.

Passively Interconnection. Beltpacks can be set up in daisy-chain or star configurations with no need for active split boxes.
Clear-Com Sound: Legendary contoured audio frequency response provides maximum intelligibility and exceptional sound quality.

Efficient Administration. System configuration and firmware upgrades are centrally managed from the main station.
Intuitive Operations. Present logical channel labels on the high-contrast, 10-character OLED display.
Effortless Navigation. Optimally positioned buttons and volume knobs are easy to locate, identify and control on the beltpack.

Highly Durable. Fabricated from lightweight cast aluminum, the beltpack is able to endure the rigors of intensive applications.

Mounting Flexibility. Sturdy beltclip, rubber bumpons and integrated strap guide offer useful mounting options.
 

Page of 2 Next > Last ≫

Veteran Owned Business Houser Audio

Houser Audio

 

Contact Houser Audio

 

Copyright 2018. Houser Audio. All Rights Reserved.